Mapegrip D2 15kg Pallet Deal - 48 Tubs

A non-slip is a ready mixed adhesive suitable for installing most internal ceramic tiles in wet areas. Mapegrip D2 is an adhesive in water dispersion based on synthetic resins, selectively graded minerals and various additives. Mapegrip D2 is a ready-to-use creamy paste that is easily trowelled with good high initial grab and thixotropic properties for installing wall tiles without slippage. When set, Mapegrip D2 has high bond strength and is sufficiently deformable for moderate vibration and deformation of building materials. Excellent waterproof properties make this adhesive the choice for wetrooms, shower areas, utility rooms, and bathrooms. Ready mixed paste adhesive for internal wall tiling with ceramic tiles and mosaics. Non-slip with high initial grab and extended open time. Suitable for domestic kitchens, bathrooms and showers. Not for commercial use.   Ready-to-use High initial grab High bond strength

Palace Easi-Flex Adhesive 20kg White PALLET DEAL 54 Bags

Palace Easi-flex is a standard (slow) setting cement based flexible tile adhesive, shown here in Grey. Use this adhesive to fix to any substrate but especially for use on areas where some movement can occur such as secured plywood, backer-board or timber panels.  This white tile adhesive is ideal for use with light coloured natural stone such as travertine and limestone to prevent shadowing and also for use on whitelight wall or floor tiles to prevent joint overspill showing through joints, also ideal for fixing glass tiles and prevent the adhesive showing through the backing. Easi-flex forms a strong bond with concrete, cement, concrete block-work and brickwork giving improved flexural strength, and also is suitable where under-floor heating is installed. It is sufficiently water-resistant to be suitable for interior/exterior use, in swimming pools and locations which are subject to persistent dampness, e.g. showers, saunas, wet rooms and bathrooms.

Palace Trade-Flex Adhesive 20kg Grey PALLET DEAL 54 Bags

Trade-Flex White is recommended for fixing porcelain & vitrified tiles to solid surfaces, heated sub-floors and 15mm ply-wood overlay. It is available is particularly recommended when fixing mosaics, marble and light natural stone such as travertine. This product's fast-setting properties allow for grouting just 3 hours after it cures to a fully water-resistant high early strength bond which is suitable for interior/exterior use and locations which are frequently wet.